Infra-red heaters cut fuel costs by lower temperature settings - Building heat loss is in direct proportion to the difference between the inside and the outside temperatures.
With RE-VERBER-RAY®, the heat is directed to the floor and not trapped at the ceiling. Therefore, you can lower thermostat settings between 5 and 10 degrees and still maintain desired comfort levels at the floor.  The high efficiencies of infra-red equipment has resulted in our customers experiencing fuel cost savings of 50% or more.

Tube Heaters - Low Intensity Infrared

Tube heaters are gas-fired infrared heaters designed to provide comfort heat.  They consist of three (3) main components: a burner control box, radiant tube, and reflector assembly.  The heaters are typically suspended from the ceiling by chains and controlled by a thermostat.  They can be installed either vented or unvented, and may use outside air for combustion if necessary.  The radiant tube may be installed in different configurations depending on the heating requirements. (see Figure 1.1)

These heaters use infrared energy to heat spaces.  When heat is required, the burner control box ignites a gas/air mixture and pushes the hot gasses into the radiant tube.  As the gases pass through the assembly, the tubing is heated and emits infrared, which is then directed toward the floor by reflectors.  This is known as primary infrared and is abosorbed by the floor, objects and people in the space, raising their temperatures.  They in turn reradiate this heat, known as secondary infrared, to create a comfort zone at the floor level.  This is how tube heaters can heat large spaces without having to provide primary infrared for every square foot of area.  However, if the goal is to spot heat a small area within a large space, only the primary infrared makes this possible. 

    DR Series - High Intensity Infrared Heaters

The DR Series is commonly used in areas with high air infiltration, high ceilings and/or spot heating applications.  The DR Series is available in a multitude of configurations, ranging from 30 to 160 MBTU/H with 3 different control options. The DR Series of infra-red heaters is ideal in applications where unvented high intensity heat offers design benefits or is preferred.  The DR Series is also ideal for unvented spot heating applications.