|
 Electric Infrared
Heaters
|
Infratube Series
Outdoor living has never been better, and
now with an
Infratube Quartz Radiant Outdoor Heater, you can enjoy
it year round. A low cost, energy efficient solution to heating
cold outdoor areas, Infratube Radiant Heaters are ideal
for patios, poolside, barbeques, gazebos, spas, garages or
any place you may need spot heat.
|
W-Series
Single Element |
|
The Infratube Heater incorporates a
specially designed
electric quartz heating element that produces safe
infrared radiant energy. Radiant energy is only
absorbed by solid objects and is not wasted heating the
air. In addition, Infratube heaters emit no harmful
ultraviolet rays.
Since there are no open flames or carbon
monoxide
emissions, mounting clearance requirements are minimal.
Infratube fixtures can be installed at lower mounting
heights, under canvas, wood awnings, eves and in
interior locations. Short standoffs allow the fixtures to
seamlessly blend in with any restaurant or patio décor.
|
 |
 |
• Low initial cost and minimal maintenance
• Energy efficient
• Suitable for Indoor or Outdoor use
• Low operating cost
• Low mounting clearance
• No open flames or carbon monoxide emissions
• Easily regulated heat output
• No tanks to fill
• One year warranty
• UL approved
|
|
Whether for work or recreation, Infratube
Heaters turn
cold indoor and outdoor areas into comfortable inviting spaces.
Infratube Heaters are easily and permanently mounted out
of reach of children and pets. Simplyflip on the switch and
reach desired heat within 90 seconds!
Electric infrared heat is remarkably
efficient and cost effective.
Over 90 % of the input energy isconverted directly to
radiant heat. Infratube heaters focus that energy with
pinpoint accuracy to the target area. Typical operating
costs for the popular W3024 model is less than $.30 per
hour based on $.10 per KW.
INFRATUBE’S parabolic reflectoris made of a
special corrosive
resistant alloy, an important feature for humid climates or
coastal areas.
|
Great For Home Use
Inexpensive and Easy to Install |
 |
Flush
mount frames give you a
professional finish for built-in installations. |
| Simple,
Cost Effective Input Regulators |
 |
Solid-state
analog single-zone controls
up to 50 amps. |
 |
 |
State-of-the-art
Digital Solid-State Controls.
Many options available, including
multiple zones, times, and non-contact
infrared thermocouples. |
Installation Options
|
|
Choosing Your W-Series Heaters: |
|
STEP
#1 - Determine the approximate measurements and mounting
heights of the area you want coverage.
STEP #2
- Choose the size heater(s) that will work both functionally and
aesthetically (coverage area, length of heater, color of heater,
ceiling, wall, or flush mount) for your installtion.
STEP #3
- Review installation table or choose (to fit your budget) between
value control options or infinite adjustment with solid state controls.
(Professional installtion is suggested).
STEP #4
- Turn on and enjoy the outdoors in comfort! |
Average
Coverage Area Chart
|
|
|
|
Downloads
|
|
